Automatic PET Bottle Blow Moulding Machine is a high speed linear blow molding machine which is developed and manufactured by our Company using the most advanced bottle blowing technology in the world. Owing to the machine's high degree of automation, high production efficiency, high safety, high stability and reliability, the products made will not be contaminated in any intermediate steps, and it can be matched up directly with the production line of filling and can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle product.
Features:
A. Advanced PLC control system, stable and excellent performance.
B. Automatic preform loading system.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the
Infrared pre-heater.
D. High adaptability, preform absorbs heat by adjusting the distance between lamp and reflector. With automatic constant temperature device, temperature is kept within a certain range.
E. Safety locks are provided during each mechanical action to protect operator's safety.
F. Use cylinder instead of hydraulic cylinder, low pollution, low noise.
G. Use different air pressure for blowing and machine operation, energy saving and environmental protection.
H. Equipped with high pressure and double-crank linkage clamping, providing high clamping force.
I. Two ways of operating: Automatic and manual.
J. Safe, reliable, unique valve position design makes blowing process easier to control
K. Low-cost, high-efficiency, easy-to-operate, easy-to-maintain, advanced automatic process flow.
L. Avoid bottle contamination
M. Protection of low temperature cooling system
N. Easy to install and start,low scrap rate.
TSP-BL series blow molding machine is the most stable two-step fully-automatic pet stretch-blow moulding machines(reheat). It has one to eight cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
|
Item
|
TSP-BL1200
|
|
|
Bottle type specification
|
Cavity
|
2
|
|
Theory output
|
1200-1300
|
|
|
Max.volume
|
5L
|
|
|
Bottle mouth maximum overall DIdiameter
|
150mm
|
|
|
Bottle biggest diameter
|
180mm
|
|
|
Bottle maximum height
|
400mm
|
|
|
Power specifications
|
Light tube quantity
|
32pcs
|
|
Light tube power
|
1.5KW
|
|
|
Maximum heating power
|
48KW
|
|
|
All electric machine installation
|
51KW
|
|
|
Actual consumption
|
35.7KW
|
|
|
Air pressure specification
|
Work pressure
|
7-9kg/cm2
|
|
Low-pressure gas consumption
|
1600L/min
|
|
|
Blow bottle pressure
|
25-35kg/cm2
|
|
|
Higher -pressure gas consumption
|
3400Ltr/min
|
|
|
Forzen water specification
|
Work pressure
|
5-6 kg/cm2
|
|
Temperature range
|
10ºC
|
|
|
Consumption
|
6000kcal/hr
|
|
|
Forzen water flow
|
50L/min
|
|
|
Machine specification
|
Size of the machine
|
4.7x1.6x1.9
|
|
Weight of the machine
|
3ton
|
|
Machine Parts
Blowing Cylinder ----Festo (Germany)
Moulding Closing and Opening Cylinder ---- Festo (Germany)
Value ---- Festo (Germany)
Revolve Cylinder ---- SMC (Japan)
PLC ---- Mitsubishi (Japan)
Touch Screen ----Hitech (Taiwan)
Switch ----Omron (Japan)
