It is widely used to produce the carbonated bottle ,mineral water,carbonated drink bottle, pesticide bottle
oil bottle cosmetics,wide-mouth bottle etc.
Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to
heat the perform, the perform rotated and heated equally.
The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the
different requirements for the action and blow .It can provide sufficient and steady high pressure for
blowing large irregular shaped bottles.
The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the
machine.
The machine can be operated in the step-by-step mode and the semi-auto mode.
The machine is small with low investment, easy and safe to operate .
Technique Parameter of blow molding machine:
| Main parameter: | ||
| Model | TSP-S4B | |
| Container | Product material | PET |
| Volume | 0.01L-2L | |
| Theoretical output | 1200-1800PCS/H | |
| Preform length | 15mm-310mm | |
| Preform inner diameter | φ5mm-38mm | |
| Moulding | Max.mould plate Dimenstion(Lx W) | 350x380mm |
| Max.mould thickness | 180mm | |
| Clamping force | 45KN | |
| Mould opening stroke | 160mm | |
| Machine size and weight | Main machine (L x W x H) | 160x60x161cm |
| Main machine weight | 500Kg | |
| Heater (L x W x H) | 187x63x145cm | |
| Heater weight | 250Kg | |
| Power |
17.5kw |
|
High Pressure compressor
| Air compressor | Unit | 1.2M3/min 30KG |
| Volume | M3 | 1.2 |
| Pressure | Kg | 30 |
| Speed | r/min | 850 |
| Power | KW | 15 |
| Overall Dimension | mm | 2000*1100*1600 |
| Weight | kg | 620 |
Air Dryer
| Refrigeration Air Dryer | Unit | 2.0M3/min 3.0Mpa |
| Flow capacity | Nm3/min | 2.0 |
| W.P | Mpa | 3.0 |
| Inlet Temp. | ºC | ≤80 |
| Dew point | ºC | 23 |
| Ambient Temp. | ºC | ≤38 |
| Power supply | V/HZ | 220/50 |
| Compressor power | Kw | 0.75 |
| Cold Medium | mm | 1050×650×1100 |
| Weight | Kg | 120 |
Air filter
| Refining-Filter | Unit | 2.0M3/min 30Kg |
| Flow Capacity | M3/Min | 2.0 |
| Max. work pressure | Mpa | 3.0 |
| Inlet Temp. | ºC | ≤50 |
| Cold Medium | mm | 750*350*350 |
| Weight | Kg | 20 |
