APPLICATION
Heat shrink wrapping machine is widely use for food, cosmetic, stationary, hardware, daily use production, pharmaceutical etc.
This machine has an imported PLC automatic program control, easy operation, safety protection and alarm function that effectively prevents incorrect packaging. It is equipped with an imported horizontal and vertical detection photoelectric, which makes it easy to switch selections. The machine can be connected directly with the production line, no need additional operators.
FEATURES
1. TSP-450 is an economical fully-auto operation L sealer by our company's independent research and development, which is widely used in mass production assembly line with auto-feeding, conveying, sealing, shrinking in one time. It is high working efficiency and suits for the products of different height and width.
2. The horizontal blade of sealing part adopts vertical driving, while the vertical cutter uses international advanced thermostatic side cutter; The sealing line is straight and strong and we can guarantee seal line in the middle of the product to achieve perfect sealing effect.
3. When it packs different sizes, the adjustment is very simple by rotating the hand wheel to increase the reliability.
4. The machine adopts the most advanced PLC programmable controller, with safety protection and alarm devices, while the sealing system can have a continuous sealing order without replacement; Maintenance is very simple.
5. Feeding length controls through a combination of electric eye detection and time relay to control precise film length that makes it easier to control the contraction effect.
6. Two groups of horizontal and vertical electric eyes are easy to switch for thin or small packages which can easily complete sealing packaging operations.
7. Automatic rolling waste material: Using a separate motor to control which is not too loose or too tight to crack and is easy to remove the waste.
8. Automatic blowing function.
9. Feeding table and collecting conveyor can be selected as your demands.
Specification:
| Model | TSP-450A |
| Power Supply |
380V 50Hz 3phase 220V 60Hz 3phase |
| Height of Worktable | 910-960mm |
| Width of Cutter | 1300mm |
| Tunnel Size(L×W×H) | 1500×1200×400mm |
| Shrink Film | PE, POF and PVC |
| Packing Size | Length : unlimited |
| Packing Speed | Depends on the length of your products(15m~50m/min) |
| Sealer Part Size(L x W x H) | 2845 x 1800 x1910mm |
| Shrink Tunnel Size(L x W x H) | 2500 x 1550 x 1765mm |
| Air Pressure | 5.5KG/cm2 |
